Albright knot for sure, easy to tie and all well tied albright should never break, within reason of course.
Big diference between a well tied knot and a poorly tied though, i usually do 6-8 wraps up the leader and then the same back to your loop. A well tied albright should be nice and neat prior to you lubricating the line and pulling it tight.
Dicey
Posts: 912
Date Joined: 23/07/10
I assume you are using a
I assume you are using a fused line for it to break so easy?
Simmo Ryan
Posts: 112
Date Joined: 17/02/10
Albright
Albright knot for sure, easy to tie and all well tied albright should never break, within reason of course.
Big diference between a well tied knot and a poorly tied though, i usually do 6-8 wraps up the leader and then the same back to your loop. A well tied albright should be nice and neat prior to you lubricating the line and pulling it tight.
Hope that helps mate.
FISH ON!!!!!!
Leemo
Posts: 3712
Date Joined: 22/02/07
+1 for the Albright.
+1 for the Albright.
bludgin' since 94'
Sharktale
Posts: 88
Date Joined: 13/07/11
What lb lines are you using
What lb lines are you using and what the purpose? Repetative casting e.g poppers? Fused or braid
Try 70 turn bimini with 15 turn yucatan
FG knot for repeat casting
Tie the knots neatly, wet and apply gentle pressure untill knots are tight.
"I FISH, 'CAUSE THE VOICES TELLS ME TO...."
JohnF
Posts: 2836
Date Joined: 07/07/10
FG knot for applications
FG knot for applications except when there is a hot bite and you need a quick leader, then albright and reduce drag......
Boston Whaler 235 Conquest......getting the flogging it was built for.
BunburyYakfisha
Posts: 124
Date Joined: 05/08/11
Albright knot is by fair one
Albright knot is by fair one of the easiest and strongest knots,i tried a Albright knot on 10lb braid to 12lb mono
and cant not snap it with my hands,even had two people pulling each end and didnt snap.....It is my fav braid to mono Knot
Cheers Jesse