Fuji reel seats
Submitted by timbo2410 on Sat, 2020-03-07 18:53
Anybody know where to get some 35mm ID Fuji reel seats from? I know they stopped making them but somebody might have some old stock. Other than that, who knows what a good quality replacement might be? Have 3 rods that have had Pacific Composites fitted and each one is either falling apart or corroding .. ideas please
dodgy
Posts: 4562
Date Joined: 01/02/10
Have you tried mudhole? Not
Have you tried mudhole? Not many places have a wider selection.
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
timbo2410
Posts: 77
Date Joined: 16/02/19
will look them up now
will look them up now
timbo2410
Posts: 77
Date Joined: 16/02/19
nope nothing even close ...
nope nothing even close ... surely there must be somebody making surf rod size + quality reel seats
dodgy
Posts: 4562
Date Joined: 01/02/10
Hmmm. I'll ask my rod
Hmmm. I'll ask my rod builder mate if he knows of anything
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
timbo2410
Posts: 77
Date Joined: 16/02/19
cheers .. there must be
cheers .. there must be somebody that makes at the same standard as Fuji. I would rather go to a solid aluminium seat (if they made them that big), than put on rubbish. My snyder rods are in perfect condition after 30 years .. cannot say the same for the PC seats!
100series
Posts: 46
Date Joined: 30/04/15
fuji reel seats.
Hasn't been 35mm fuji seats around for a long time, i've hacked up a couple of good rods to re-use the seats on new blanks. Unfortunately no one builds quality seats like fuji.
Stevo81
Posts: 1278
Date Joined: 16/04/12
Try
Try Laith
www.reelservicesaustralia.com.au/rod-building/
•••••••• Electrical Contractor NOR ••••••••
timbo2410
Posts: 77
Date Joined: 16/02/19
no joy .. apparently the
no joy .. apparently the only ones now available are from Pac Bay .. quality is an issue even if you can get the 35mm which are hard to get