Issue with my Lowrance HDS 12 sounder?

Issue with my Lowrance HDS 12 sounder?

 Hi all fixed my Charts with help from FW members now the sounder is not showing any structure just a white screen with the depth bar, I did have some stabilisers put on a few months ago not sure if the proximity could be causing issues any advice appreciated? Kelvin

 


still trying's picture

Posts: 1017

Date Joined: 27/06/17

 Not sure if there is other

Thu, 2020-11-26 19:38

 Not sure if there is other ways but my sounder did that and I ended up doing a factory reset and everything came back. 

____________________________________________________________________________

 rather be fishing

scubafish's picture

Posts: 947

Date Joined: 15/08/12

My opinion

Fri, 2020-11-27 08:36

Trim plate wrong place and Transducer should be left side of plate and lower .Trim tabs are for port & starboard tilt and tilt switch on outboard is for bow up & down.You would only have starboard sidescan in that current position.

https://www.thehulltruth.com/boating-forum/271507-swim-ladder-trim-tabs.html

____________________________________________________________________________

http://img.gg/BQ91Sys

Posts: 1097

Date Joined: 19/06/14

Never mind the transducer.

Tue, 2020-12-01 12:51

How cool is your number plate?. Very apt for a boat trailer. 

____________________________________________________________________________

 My wife understands why I clean my rods n reels in the shower....

 

Faulkner Family's picture

Posts: 17835

Date Joined: 11/03/08

 The trim tabs in my opinion

Tue, 2020-12-01 19:24

 The trim tabs in my opinion are definitely in the wrong spot . I have had them and they were a lot closer to the edge and so have most others I have seen . Wouldn't be helping with the sounder 

____________________________________________________________________________

RUSS and SANDY. A family that fishes together stays together