ROD SUGGESTIONS / ADVICE .....

Hey all,

 

I'm updating all my old gear and need to replace the old land-based rods from AGES ago with ones suitable for the boat : Jigging / Bottom Bouncing, Trolling.

 

I've got a fair few of old reels, but the only 2 decent ones that will make it onto the boat - both nice Shimano Stradics that are basically new.

 

I've just added 2 new reels, so the collection so far is

 

* Shimano Saragosa 18000F  (on it's way)

* Daiwa Saltist LD30 (2-speed O/Head)

* Shimano Stradic 4000 (with spare spool)

* Shimano Stradic 2000 (with spare spool)

 

I'm wanting to cover Sambo's, Demersals, KG's, Squidding - plus possibly some trolling for fun stuff.

Obviously the Stradics will be targeting the lighter end - so was thinking the 4000 could go on a rod for Lighter Jigging plus a lighter spool for KG, flathead etc and the 2000 could be set up for squid ??

Both have spare spools, so could be rigged differently if required.

 

Any & all suggestions will be appreciated.

 

eg "Saragosa spooled with PE6-8 on a XXXX Rod for XXXX Fish / Jigging"

 

A shitload has changed since the last time I fished from a boat pulling up monster Dhuies with my grandfather back in the late 70's / early 80's in Geographe Bay

on hand-lines, old Alvey boat reels and boat rods that resembled broome sticks !

- so I'm WAY out of touch with modern gear.

 

I'd like to get some decent gear, without going overboard 1st up.

 

Budgets ?

 

Was thinking $200-300 for the Saragosa & Saltist

And maybe $125-200 for the Stradics.

 

If there's any suggestions for another Rod/Reel combo to add to the "arsenal" that would be better suited to the bigger target fish, that would be great too.

 

Regards,

 

Dizz.


Posts: 254

Date Joined: 19/09/11

 i have a saragosa with 65lb

Sun, 2011-11-06 17:14

 i have a saragosa with 65lb line with a 6-8pe diawa monste mesh max, i use it for bottom bouncing and jigging have not used it trolling yet, i think a good setup for its price!

rockoe_'s picture

Posts: 140

Date Joined: 02/09/10

hey dizzy,check out the new

Sun, 2011-11-06 19:04

hey dizzy,check out the new shimano terez,they have an awesome range of rods. i've matched my 18000 f saragosa with a 6'6 40-80lb terez. it's tough as nails,looks nice and  is great for jiggin,bottom bouncing and trolling.it retails for around $230 i hope this helps!

Posts: 9358

Date Joined: 21/02/08

The terez are ok, they are

Sun, 2011-11-06 19:38

The terez are ok, they are exceptionally heavy though!

____________________________________________________________________________

rockoe_'s picture

Posts: 140

Date Joined: 02/09/10

heavy as in to hold? 

Sun, 2011-11-06 19:42

heavy as in to hold?

 

Posts: 9358

Date Joined: 21/02/08

Yes, they weigh more than

Mon, 2011-11-07 06:44

Yes, they weigh more than other comparable outfits.

____________________________________________________________________________

rockoe_'s picture

Posts: 140

Date Joined: 02/09/10

either way theres a link with

Sun, 2011-11-06 19:56

either way theres a link with all the specs and it tells you a bit about the range

http://www.shimanofish.com.au/publish/content/global_fish/en/au/index/products/rods/Offshore/terez.html

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Thanks Mate - will check them

Tue, 2011-11-08 09:22

Thanks Mate - will check them out.

Posts: 74

Date Joined: 14/10/10

Rod for your saragosa maby?

Sun, 2011-11-06 22:16

Mate i got a jm 250gram spin (jig) rod for sale that is brand new (used onced but only for 1 drop)

Would suit your saragosa loaded with pe 3 to 6 line for sambos and heavier demersal jigging / bottom bashing.

If interested  give me a call on 0417170484 or pm.

Can email pic's if wanted. Asking $350.

Jarrad

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Thanks for the offer. I was

Tue, 2011-11-08 09:30

Thanks for the offer.

 

I was thinking PE 6-8 for the Saragosa, so it might be a bit light ?

 

A PE 4 Rig was what I was thinking for the Saltist LD30 2-speed Overhead.

 

Posts: 181

Date Joined: 07/12/08

monster mesh max 200$

Mon, 2011-11-07 07:07

monster mesh max 200$ campbells cheap as chips........good entry level jigger

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Thanks fellas, Keep the

Tue, 2011-11-08 09:21

Thanks fellas,

 

Keep the suggestions coming if you got 'em !

bradz's picture

Posts: 693

Date Joined: 29/10/07

Crony Prodigy

Tue, 2011-11-08 11:33

Hi Dizzy

Another option if you needed PE4 could be the Crony Prodidy PRJC-601MH. The details of the rod say PE4 to PE6 but they have been re-rated to 20lb to 50lb and are a sweet rod. Funnily enough I also have one if you are keen for a look?

Cheers

Brad

____________________________________________________________________________

I did then the best that I knew how. When I knew better, I did better.

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Thanks mate - I'll look it up

Tue, 2011-11-08 20:38

Thanks mate - I'll look it up

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Looking around the 'net I

Tue, 2011-11-08 20:41

Looking around the 'net I noticed What's the story with the different Rod models for Australia vs US ?? - especially Daiwa ??

 

Reels seem to be the same, but rods ?

 

I know different waters / different fish etc, but is it just a name / model change - or are they just a completely different set of rods ?

Posts: 9358

Date Joined: 21/02/08

Completely different. USA

Tue, 2011-11-08 21:19

Completely different.

USA Saltiga is pretty crappy, alconite guides etc. Aus Saltiga is bling bling!

____________________________________________________________________________

Dizzy's picture

Posts: 753

Date Joined: 21/02/11

Thanks Till - yeah, the

Tue, 2011-11-08 21:26

Thanks Till - yeah, the Aussie Daiwa website & range of gear looks nicer & much more comprehensive.

 

US has no Hiramasas, No Demon Bloods etc etc